Posts Tagged ‘rider’

Rider current as of February 2, 2010

Sunday, March 14th, 2010

THE AUDIO AND LIGHTING SYSTEM SHALL BE A CLASS “A”
SYSTEM. THIS MEANS PRO AUDIO & LIGHTING CONTRACTORS
ONLY. ABSOLUTELY NO HOBBYISTS, MUSIC STORE SYSTEMS OR
SUPPORT ACT SYSTEMS WILL BE ACCEPTED.

3. FRONT OF HOUSE AUDIO SYSTEM
A. Front of house sound system shall be an active four way stereo system, capable of producing an unequalized frequency response of +/- 3db 50Hz - 18KHz, at an undistorted signal of 120 dB SPL at
the front of house console in any venue. For outdoor events, delay stacks should be made available.
B. The FOH (Line Array Only) enclosures will be EAW, ADAMSON, V-DOSC, McCAULEY MLA-6,
MEYER M3D, or JBL VERTEC. Any proprietary enclosures must be approved by Producer/Artist’s
Production Manager.
C. The FOH speaker enclosures must be properly positioned and capable of producing a flat response for
all sold seating areas. This includes front filled position (in front of stage) driven by a matrix or
auxiliary send.
D. The FOH speaker enclosures are to be powered adequately and accordingly to speaker and driver
requirements.
E. Power Amps are to be CROWN, LAB GRUPPEN, or QSC.
Ex: Crown IT-8000 to power subs.
Crown IT-6000 to power mids.
Crown IT-6000 to power mid-high and highs.
F. Cross Overs/Systems Processors accepted are LAKE CONTOUR, XTA, KT, or BSS. (Located at
FOH)

(more…)

Audio:for those new to riders

Friday, March 12th, 2010

First I would thanks George and his article to talk about what we interested,here is it:

A pretty typical rider for a not yet well known country artists for a free outdoor radio station event that draws about 12,000 folks, the radio station budgets about 15,000$ for production , it is my job to negotiate with the artists production manager all the NON NEGOTIABLE points to fit what I can provide and then rent in what I need to rent prior to my final quote to the radio station
if I meet this spec  word for word I would be looking at around a $60,000n cost of production
I will get us in at very “around ” 20,000

. STAGE REQUIREMENTS (INDOOR/OUTDOOR)

A. Stage dimensions are to be four (4’) to six (6’) feet tall, sixty (60’) feet wide, and forty (40’) feet deep.
Two (2) sets of stairs for staging shall be located upstage right and upstage left. Stage and tech wings
must have toe rail around entire perimeter.
B. Sound wings are to be separated from stage and include enough space for working area around
enclosures. Sound wings are to be at least five (5’) feet downstage from the front edge of the stage.
All flown enclosures are to be five (5’) feet downstage from the front edge of the stage.
Please note: Above requirement is of the utmost importance.
C. Monitor wings and guitar station wings will be of the following size:
16’ X 16’ for both positions. (more…)